UP14-PV/DX 12V/24V Dual PEEK Gear Pump 92 l/min 2 bar with check valve
€0.00
Dual PEEK gear pump system for diesel and water transfer: 92 l/min (24.3 gpm) at 2 bar.
The Marco UP14-PV/DX is a self-priming unit with two connected electric pumps featuring helical PEEK gears and an integrated non-return (check) valve. Nickel-plated brass body and fittings, stainless steel shaft. Main application: diesel and water transfer.
Available in 12V (16450612) and 24V (16450613). Use the voltage selector to choose your version.
Description
Marco UP14-PV/DX dual PEEK gear pump
Self-priming water pressure system with two connected pumps featuring helical gears in PEEK and a built-in non-return valve. Body and fittings are nickel-plated brass and the shaft is stainless steel. Main application: diesel and water transfer.
Performance
Two pumps work together to deliver up to 92 litres per minute (24.3 gpm) at a maximum pressure of 2 bar (29 psi), with self-priming up to 3 m. Ports are 3/4" BSPP, recommended hose 19 mm.
Voltage versions
12V: part number 16450612 · 24V: part number 16450613.
Technical details
Part n. | 16450612 | 16450613 |
Product name | UP14-PV/DX | UP14-PV/DX |
Voltage | 12V DC | 24V DC |
Max flow rate | 92 l/min | 92 l/min |
Max flow rate (USA) | 24.3 gpm | 24.3 gpm |
Max pressure | 2 bar | 2 bar |
Max pressure (USA) | 29 psi | 29 psi |
Self-priming | 3 m (9.8 ft) | 3 m (9.8 ft) |
Hose | 19 mm (0.7 in) | 19 mm (0.7 in) |
Ports | 3/4" BSPP | 3/4" BSPP |
Gears | PEEK, helical | PEEK, helical |
Body and fittings | Nickel-plated brass | Nickel-plated brass |
Shaft | Stainless steel | Stainless steel |
Seal / O-ring | FKM / NBR | FKM / NBR |
Check valve | Integrated | Integrated |
Motor power | 800 W | 800 W |
Max amperage | 66 A | 33 A |
Fuse | 70 A | 40 A |
IP protection | IP67 | IP67 |
Wire | 4 mm2 (12 AWG) | 4 mm2 (12 AWG) |
Weight | 14.9 kg (32.8 lb) | 14.9 kg (32.8 lb) |
Dimensions L x W x H | 530 x 297 x 158 mm (20 7/8" x 11 3/4" x 6 1/4") | 530 x 297 x 158 mm (20 7/8" x 11 3/4" x 6 1/4") |
Fluids
Fluids allowed
Water, up to 60 °C
Diesel fuel
Minimum flashpoint for any liquid: 38 °C.
Not allowed
Petrol (gasoline)
Solvents
Flammable liquids with a flashpoint below 38 °C
Liquids with viscosity above 20 cSt
Corrosive chemical products
Installation notes
Electrical installation
Install a correctly rated fuse (70 A on 12V, 40 A on 24V) and a switch. Warranty expires if no fuse is used. Use 4 mm2 (12 AWG) cable, sized to the distance between pump and battery.
Not suitable for switching (PWM) applications because of the built-in EMI filter.
Operating limits
Ambient temperature -10 to +60 °C. Continuous operation at pressures up to 50% of maximum; higher pressure and current draw only in on/off cycles, so the motor can cool down.
ISO 8846 compliant device. Always mount the anti-vibration rubber fittings supplied with the kit.
