UP1600 Submersible pump 100 l/min
€82.00
The new UP1600 submersible pump, available in 12V and 24V versions, represents a technological upgrade for marine applications and is designed to ensure high performance, stable operation, and long service life even under the most demanding onboard conditions.
The mechanically sealed pump body, assembled with screws and O-rings instead of welds, ensures reliable sealing over time, greater resistance to vibrations and thermal cycles, and more accurate quality control during production, making the pump particularly robust and durable in the marine environment.
Hydraulic optimization, achieved through the redesign of the impeller and the suction channel, improves fluid flow, prevents cavitation and air bubble formation, and ensures constant flow rate and smooth operation, even under non-ideal suction conditions.
The UP1600 delivers quiet and smooth performance with reduced vibrations, contributing to onboard comfort. Designed for simplified OEM integration, it is ideal for both recreational and professional vessels. ISO 8849 and ISO 8846 certified.
Technical details
Part n. (12V / 24V) | 16014112 / 16014113 |
Product name | UP1600 |
Voltage | 12V DC / 24V DC |
Max flow rate | 100 l/min (26.4 gpm), 1600 gph |
Max pressure | 0.4 bar (5.8 psi) |
Lift | 4 m |
Max amperage | 8 A (12V) / 5 A (24V) |
Fuse | 12 A (12V) / 7.5 A (24V) |
Motor power | 120 W |
IP protection | IP67 |
Wire | 0.75 mm² (18 AWG) |
Hose | 30 mm (1.2 in) |
Seal / O-ring | NBR / NBR |
Features | Heavy duty pump housing, mechanically sealed body (screws and O-rings, no welds), optimized impeller and suction channel |
Weight | 1.1 kg (2.4 lb) |
Dimensions (diameter x height) | Ø107 x 148.5 mm (4 1/4" x 5 7/8"), 133.6 mm (5 1/4") overall width including outlet |
Standards | ISO 8849, ISO 8846 |
Fluids
Allowed:
Water (fresh water and salt water), up to 43 °C
Not allowed:
Petrol (gasoline)
Solvents
Flammable liquids with flashpoint below 38 °C
Liquids with viscosity above 20 cSt
Corrosive chemical products
Installation notes
Install a correctly rated fuse (12 A on 12V, 7.5 A on 24V). Installing the fuse is compulsory.
Brown (+) wire to the positive battery terminal, black (-) wire to the negative terminal.
Make the electrical installation in a dry place to avoid contact with water.
Use correct bilge pump hose, keep the hose run as short and steep as possible to avoid air locks, and fix hoses with stainless steel clamps.
Mounting: lift the power module out of the strainer, fix the strainer with stainless steel screws, then insert the power module back onto the strainer.
