Self-priming electric pump delivering an exceptionally high flow rate, up to 120 l/min (31.7 gpm), approximately +20% higher than standard market solutions, designed to ensure maximum efficiency and fast filling and draining operations, making it ideal as a ballast pump.

The self-lubricating technopolymer pump body, combined with a flexible rubber impeller, provides a very low friction coefficient, high hydraulic efficiency and long service life, while also contributing to reduced electrical power consumption. The pump is optimized to deliver maximum speed in each filling and draining phase, making it particularly suitable for high-performance ballast systems.

The reversible design ensures identical flow rates in both flow directions and constant current draw during motor reversal, guaranteeing electrical stability and system reliability even under intensive operating conditions. Manufactured in compliance with ISO 8846 and ISO 8849 standards, it is suitable for use in marine environments on both recreational and professional vessels.

Technical details

Fluids

Allowed: diesel fuel.

Not allowed:

• Petrol (gasoline)

• Solvents

• Flammable liquids with a flashpoint below 38 C

• Liquids with viscosity above 20 cSt

• Corrosive chemical products

Installation notes

• Install a correctly rated 30 A fuse and a switch. The warranty expires if no fuse is used.

• Use 4 mm2 (12 AWG) cable, sized to the distance between pump and battery.

• Do not run the pump dry for more than a few minutes.

• Fit the anti-vibration rubber mounts supplied with the pump.

• Check the full instruction booklet before installation.

Download

Download Booklet UP1-TD 12V (16210512)