UP1001 Submersible Pump with Non-Return Valve 63 l/min
52,00 €
The new submersible pumps, available in 12V and 24V, ensure quick installation, easy maintenance and reliable operation, even under demanding onboard operating conditions. The motor–impeller bayonet coupling design allows the motor to be replaced without disconnecting hoses or removing the pump body from the bilge, significantly reducing service time and simplifying maintenance operations. The multifunction hose fittings, compatible with two hose diameters, provides installation flexibility for both new systems and retrofit applications. The integrated check valve prevents water backflow and ensures complete bilge drainage, improving overall system efficiency and reducing unwanted pump activations. ISO 8849 and ISO 8846 certified.
Technical details
Part n. (12V / 24V) | 16012112 / 16012113 |
Product name | UP1001 |
Voltage | 12V DC / 24V DC |
Max flow rate | 63 l/min (16.6 gpm) |
Max pressure | 0.4 bar (5.8 psi) |
Lift | 4 m |
Max amperage | 4 A (12V) / 2.5 A (24V) |
Fuse | 7.5 A (12V) / 5 A (24V) |
Motor power | 48 W (12V) / 60 W (24V) |
IP protection | IP67 |
Wire | 0.75 mm² (18 AWG) |
Hose | 25 mm - 29 mm (two diameters) |
Seal / O-ring | NBR / NBR |
Features | Integrated check valve, bayonet motor, easy maintenance |
Weight | 0.5 kg (1.1 lb) |
Dimensions L x W x H | 135 x 70 x 118 mm (5 3/8" x 2 3/4" x 4 5/8") |
Standards | ISO 8849, ISO 8846 |
Fluids
Allowed:
Water (fresh water and salt water), up to 43 °C
Not allowed:
Petrol (gasoline)
Solvents
Flammable liquids with flashpoint below 38 °C
Liquids with viscosity above 20 cSt
Corrosive chemical products
Installation notes
Install a correctly rated fuse (7.5 A on 12V, 5 A on 24V). Installing the fuse is compulsory.
Brown (+) wire to the positive battery terminal, black (-) wire to the negative terminal.
Make the electrical installation in a dry place to avoid contact with water.
Use correct bilge pump hose, keep the hose run as short and steep as possible to avoid air locks, and fix hoses with stainless steel clamps.
Mounting: lift the power module out of the strainer, fix the strainer with stainless steel screws, then insert the power module back onto the strainer.
