UP8-MS/XC Pump Stainless Steel with Mechanical Seal, PEEK gears 10 l/min
341,00 €
Self-priming electric pumps with compact mechanical seal and helical gears in PEEK. The drive shaft is made of AISI316, with a stainless steel body and fittings. Mechanical seal with EPDM or FKM components. The enhanced motor is designed for continuous use under pressure.
Technical details
Part n. (12V / 24V) | 1F409412 / 1F409413 |
Product name | UP8-MS/XC |
Voltage | 12V DC / 24V DC |
Max flow rate | 10 l/min (2.6 gpm) |
Max pressure | 5 bar (72.5 psi) |
Self-priming | 3 m (9.8 ft) |
Max amperage | 14 A (12V) / 7 A (24V) |
Fuse | 20 A (12V) / 15 A (24V) |
Motor power | 150 W |
IP protection | IP67 |
Wire | 1.5 mm² (16 AWG) |
Hose | 13 mm (0.5 in) |
Ports | 3/8" BSPP |
Seal / O-ring | FKM / FKM |
Gears | PEEK, helical |
Drive shaft | AISI 316 stainless steel |
Body and fittings | Stainless steel |
Mechanical seal | Compact mechanical seal |
Weight | 1.9 kg (4.2 lb) |
Dimensions L x W x H | 196 x 103 x 101 mm (7 3/4" x 4" x 4") |
Standard | ISO 8846 |
Fluids
Allowed:
Water, up to 60 °C
Diesel fuel (minimum flashpoint 38 °C)
Not allowed:
Petrol (gasoline)
Solvents
Flammable liquids with flashpoint below 38 °C
Liquids with viscosity above 20 cSt
Corrosive chemical products
Installation notes
Install a correctly rated fuse (20 A on 12V, 15 A on 24V) and a switch. The warranty expires if no fuse is used.
Use 1.5 mm² (16 AWG) cable, sized to the distance between pump and battery.
Not suitable for switching (PWM) applications because of the built-in EMI filter.
Continuous operation at pressures up to 50% of maximum; higher pressure and current draw only in on/off cycles so the motor can cool down.
Fit the anti-vibration rubber mounts supplied with the pump.
Use an inlet filter, especially with fluids containing impurities, and keep it clean.
Do not run the pump dry for more than a few minutes.
